Duct Type Metallic
March 4, 2017
cctv enclosure
March 3, 2017

specialized outdoor cabinet



Product No.:- OD Cabinet (outdoor), with ODB 24F.


Cabinet Size: – 1300x1200x350mm.

Structure: Fully solid steel structure made of steel Sheets 2mm.

Front Door:  Removable double metal door along with Metal Hinges and L/N key safety lock at two places.

Top: Both side sliding surface to avoid any water dropping or stay at top.

Bottom: Bottom Plate with cable entry openings and  ground mounting holes.

Gland Plate:  Gland plate available with Different sizes of glands to hold the cable for fiber and electric.

Back Mounting plate : Back mounting plate is available to hold different kind of electrical and fiber equipment’s with arrangements of PVC cable organizers

Sides: Fan opening on both sides x 2.

Material :  Sabic Standard GI.

IP Rated: Yes (IP55)

Finishing: Powder coated as required RAL Number.

Fan: Tube Axial Fan (Ball Bearing).

Door Lock:  L/N Key Door Lock top and bottom of the door.

Gas kit : Foam gasket 3/4″ for Cabinet top.

PVC Cable Organizer: 60 x 60 , 40 x 40 , 25 x 30 (All sizes are in mm).

Circuit Breaker: Circuit Breaker 63A/100A & 10A  M.Gerin.

Bus Bar: Bus Bar 23 cm.

Cu bar  : 30x240x5MM.

Rail channel: 35x15x1.5mm x 2M Slotted.

Cable Gland: Cable holding glands 21mm- White Color & 13.5mm – White , 90 Black.

Rubber Sheet: 4mm thickness for bottom to install on ground (to avoid any water penetration).

Insulator SM: Bus Bar Insulator SM 25 red color plastic round.

Thermostat: Temperature controller 10A/220VAC.

Enclosed Switch: 2CMA142407R1000 (BW 240 DP) Enclosed Switch Disconnector.

Breaker: C60H RCBO (C32 R30)  Schneider 1P.

Breaker (ll): 6A MCB Schneider 1P.

ODB 24F : As Attached DATA SHEET.

MIRA-DTX Fiber Optic Enclosures is offered as Optical Distribution Boxes (ODB) . They had been developed to address the key requirement of fiber termination from distribution to drop cable in FTTX networks.

The high quality enclosure terminates and splices up to 96 fibers. It Can also be used in metro outside plant (OSP) networks. It protects fiber cable and connections through use of patented angled adapter and design features that

maintain correct bend radii throughout the box. Wall mount type box provides excellent termination requirement as per the need .


  • Swing Double Front Door enables full access during installation and maintenance
  • Excellent routing, storage, protection and management functions
  • Optical splice capability
  • Suitable for indoor and outdoor operations
  • Wall Mounted Facility with 4 Mounting Screws & Fishers
  • Water proof and dust proof Lockable box with Protection Degree IP56
  • Provided with Top & Bottom Cable Glands for Cable Entries
  • Manufactured from G.I sheet with Powder coating RAL 7035
  • Accommodates standard connectors /adapters types , SC,
Parameters Specifications
Optical Wavelength SM : 1260 – 1650 nm  MM : 850 ~ 1300 nm
Insertion Loss Single Mode ,Maximum 0. 30 dB     Typical   :   0.15 ~ 0.20 dB
Return Loss SM : Minimum  50 dB for PC , 55 dB for UPC ,


Operating Temperature – 10 ° C to +75° C
Fiber  Standard Single mode
Pigtail Standard 0.9 mm Ø
Connector /Adapter Standard EIA / TIA and IEC Compliance